鐵之狂傲

 取回密碼
 註冊
搜尋

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

切換到指定樓層
1#
CG-47 Ticonderoga
CG-47 提康德羅加級飛彈巡洋艦





原文:
Modern US Navy guided missile cruisers perform primarily in a Battle Force role. Due to their extensive combat capability, these ships have been designated as Battle Force Capable (BFC) units. Their primary armament is the Vertical Launching System (VLS) employs both the long range surface-to-surface Tomahawk Cruise Missile and the Standard Surface-to-Air Missile. These multi-mission ships are capable of sustained combat operations in any combination of Anti-Air, Anti-Submarine, Anti- Surface, and Strike warfare environments. They are built to be employed in support of Carrier Battle Groups, Amphibious Assault Groups, as well as interdiction and escort missions.

The Ticonderoga class, using the highly successful Spruance hull, was initially designated as a Guided Missile Destroyer (DDG), but was redesignated as a Guided Missile Cruiser (CG) on January 1, 1980. The Ticonderoga class were the first surface combatant ships equipped with the AEGIS Weapons System, the most sophisticated air defense system in the world. Technological advances in the Standard Missile coupled with the AEGIS combat system in Ticonderoga class cruisers and the upgrading of older cruisers have increased the AAW capability of surface combatants. The heart of the AEGIS system is the SPY-1A radar, which automatically detects and tracks air contacts to beyond 200 miles. The AEGIS Weapons System is designed to defeat attacking missiles and provide quick reaction, high firepower, and jamming resistance to deal with the Anti-Air Warfare threat expected to be faced by the Battle Group.


Twenty-two TICONDEROGA-class AEGIS cruisers, starting with CG-52, have vertical launch systems (VLS) which permit them to carry and launch significant numbers of TOMAHAWK precision strike cruise missiles against targets of military importance deep in enemy territory. This land attack capability, coupled to their AEGIS anti-air missile systems, AN/SQQ-89 Undersea Warfare system and sophisticated C4ISR suite, make these ships the most powerful surface combatants in service with any navy.
 
轉播0 分享0 收藏0

回覆 使用道具 檢舉

全世界最先進的跳動筆

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

續:

A new modernization plan for surface combatants would decommission some ships early, but would boost the firepower of the remaining force by adding the Vertical Launch System (VLS). The five TICONDEROGA-class cruisers in the fleet without VLS would receive the system: USS TICONDEROGA (CG 47), USS YORKTOWN (CG 48), USS VINCENNES (CG 49), USS VALLEY FORCE (CG 50) and USS THOMAS GATES (CG 51).

The Ticonderoga class also brings a multi-warfare capability to the Fleet which significantly strengthens Battle Group operation effectiveness, defense, and survivability. The cruisers are equipped with Tomahawk ASM/LAM giving them additional long range strike mission capability. The addition of Tomahawk ASM/LAM in the CG-47 class has vastly complicated unit target planning for any potential enemy and returned an offensive strike role to the surface forces that seemed to have been lost to air power at Pearl Harbor. Two five-inch gun mounts are used against threatening ships and boats, low-flying aircraft, or to bombard shore targets. In addition, the ships carry a strong Anti-Submarine Warfare Suite and the Navy's latest Electronic Warfare Suite is also aboard. The cruisers have the most advanced underwater surveillance system available today. The Anti-Submarine Warfare (ASW) equipment consists of a hull-mounted SONAR, an Acoustic Array SONAR which is towed like a tail behind the ship, and a helicopter that can locate ships or submarines over 100 miles away.

The "Tico" cruisers, using the SPRUANCE Class hull, measure 567 feet from bow to stern. Their beam is 55 feet, and displacement is 9,600 tons. Four powerful gas turbine engines propel the ships to speeds greater than 30 knots, and two controllable-reversible pitch propellers assist in rapid acceleration and maneuverability.

Authorized in Fiscal Year 1978, TICONDEROGA's keel laying ceremony occurred on 27 January 1980. The first five Ticonderoga-class cruisers⑳iconderoga (CG-47) through Thomas S. Gates (CG-51) ave an early, less capable version of the Aegis combat system and do not have VLS or the capability to launch Tomahawk cruise missiles. Also, the first two ships of the class have two SH-2F helicopters instead of the SH-60B helicopter employed on later cruisers. The guided missile cruiser Port Royal (CG 73) was comissioned on Saturday, July 9, 1994. Port Royal was the last of 27 Ticonderoga class Aegis guided missile cruisers scheduled to be built. These new cruisers have replaced older, less capable ships that are being taken out of service as part of the Navy's overall plan to recapitalize the fleet.
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

續:

These ships were built in sections, called modules, which allowed improved access to all areas of the ship during construction. The modules were then moved together to form the hull of the ship, and the deckhouse sections were then lifted aboard. For launching, the ship was moved several hundred yards across land to the floating dry dock, which was used to actually launch the ship.

During their construction, hundreds of subassemblies were built and outfitted with piping sections, ventilation ducting, and other shipboard hardware. These subassemblies were then joined to form modules, which were then outfitted with larger equipment items, such as propulsion and power generation machinery and electrical panels. This represents an advancement from traditional shipbuilding in which these systems are installed in tight quarters below decks after the hull is completed. At Ingalls, four of these pre-outfitted hull and superstructure modules are joined together to form the ship shortly before it is moved to the water's edge and launched.

At the shipyards, this modular process is supported by an extensive Computer- Aided Design (CAD)/Computer-Aided Manufacturing (CAM) program that has significantly enhanced the efficiency of detail design, and has reduced the number of manual steps involved in converting design drawings to ship components. The three-dimensional CAD system is linked with an integrated CAM production network of computers throughout the shipyard. The CAD system directs the operation of numerically-controlled manufacturing equipment used to cut steel plates, cut and bend pipe, and form sheet metal assemblies.

Launching involved movement over land via a wheel- on-rail transfer system onto the shipyard launch and recovery dry dock, which is was ballasted down in order for the ship to float free and moved to an outfitting berth in preparation for the traditional christening ceremony. Upon completion of post-launch outfitting, the cruisers went through an extensive dockside and at-sea testing period to ensure the ship and crew were ready to safely go to sea.

The Smart Ship Project was initiated by an October 1995 brief from the Naval Research Advisory Committee (NRAC) panel on reduced manning to the Chief of Naval Operations. Their report stated that the major obstacle to reduced crew size and decreased life cycle costs aboard Navy ships was culture and tradition rather than the lack of proven technology and know-how. The challenge was to demonstrate in an operational ship that reductions in workload and crew requirements were possible while maintaining mission readiness and safety. The Commander, Naval Surface Force, US Atlantic Fleet (COMNAVSURFLANT) was designated as Executive Agent for the Smart Ship Project and nominated USS YORKTOWN (CG 48) as the ship in which to implement ideas to demonstrate the concept.
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

SMART SHIP "CORE TECHNOLOGIES"

Integrated Bridge System (IBS): automated piloting, ship旧 course and track analysis with radar and chart overlay, including collision avoidance.

Integrated Condition Assessment System (ICAS): automated condition-based maintenance recorder for main propulsion and auxiliary equipment; digital information maintained on fiber optic LAN.

Damage Control Quarters (DCQ): automated damage control management system providing information and communication throughout the ship on the fiber optic LAN.

Machinery Control System (MCS): automated digital propulsion and electrical plant control using signals passed via the fiber optic LAN.

Fuel Control System (FCS): automated digital control of ship fuel transfer system.

Wireless Internal Communication System (WICS): individual ship company personal communications or near the ship.



Fiber Optic Ship Wide Area Network (FO SWAN): fiber optic LAN hosting the above listed core technologies (vice the WICS) utilizing asynchronous transfer mode (ATM) and being IT 21 compliant

All approved Smart Ship initiatives were implemented aboard YORKTOWN prior to her deployment in December 1996. Huge chunks of the ship were torn up and thrown away and replaced by computer consoles and miles of fiber optic cable.
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

艦內系統:

A local area network was installed, bringing greater versatility in communications and training. Smart Ship Inovations allowed the bridge team to go from 13 personnel on watch at a time down to 3.


 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

續:

Smart Ship inovations allowed the Engineering team more flexablility in the operation of the engineering plant. It has also allowed the engineering Central Control Station to go from 11 people on watch at one time down to 4.



 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

原文:

With all policy and procedure, technology, and maintenance initiatives implemented, crew reductions enabled by the decrease in workload were 44 enlisted personnel and 4 officers The Smart Ship Project demonstrated that shipboard workload reductions are possible while maintaining combat readiness and safety with significant net positive return on investment. Expenditures on available technology and implementation of policy and procedure changes make crew size reductions achievable. The required expenditures for such changes are offset by large potential savings, both shipboard and ashore, and in operations and maintenance costs aboard ship. Technology, taken as a single package as installed in YORKTOWN, returns the investment in seventeen years. However, some of the individual technologies demonstrate a more positive return-on-investment.


In the Fall 1998 USS THOMAS S. GATES (CG 51) was scheduled as the first installation ship in the US Navy's Integrated Ship Controls (ISC) Program. This upgrade program will install innovative labor and cost savings initiatives on USS THOMAS S. GATES, USS TICONDEROGA (CG 47), USS VINCENNES (CG 49) and USS VALLEY FORGE (CG 50). Many of the technologies to be installed are the result of the initiatives proven sucessful on YORKTOWN. The upgrade program also includes options to install systems on the remaining 22 CG 47 Class AEGIS Cruisers. Modernization of the machinery control system for CG 47 Class ships is required in order to overcome impending obsolescence, reduce operating and support costs, and facilitate workload reductions. This will be accomplished with the installation of commercial off-the-shelf/non-developmental items (COTS/NDI).

The Aegis Cruiser force will remain on the front line into the 21st century, with upgrades as part of the Cruiser Conversion program. This conversion program will ensure the relevance of these ships in the future. Without this program, their future is tenuous. In the program, the modernized combat system will address the growing theater ballistic missile threat by incorporation of area and theater-wide TBMD capability. Additionally, introduction of two five inch 62 caliber guns with extended range guided munitions in 22 of these ships will help meet the USMC requirements for fire support. They will continue to receive upgrades to their command and control suites to ensure they remain full participants in the joint battlespace. This conversion program takes advantage of the sizable investment ($22B) already made in these ships, and keeping them ready to meet the challenge over 40 years of service life. It is important to note that the first five AEGIS cruisers (CG47 ? CG51) are not part of the Cruiser Conversion program because of affordability.
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

Specifications(數據)
BuildersIngalls Shipbuilding: CG-47-50, CG 52-57, 59,62, 65-66, 68-69, 71-73
Bath Iron Works: CG-51,58,60-61,63-64,67,70
Propulsion4 General Electric LM-2500 Gas Turbine Engines (80,000 Shaft Horsepower)
2 Controllable-Reversible Pitch Propellers
2 Rudders
LengthOverall Length: 567 ft
Waterline Length: 529 ft
BeamExtreme Beam: 55 ft
Waterline Beam: 55 ft
DraftMaximum Navigational Draft: 33 ft
Draft Limit: 23 ft
DisplacementLight Displacement: 7103 tons
Full Displacement: 9957 tons
Dead Weight: 2854 tons
Speed30 plus knots
AircraftTwo SH-2 Seasprite (LAMPS) in CG 47-48
Two SH-60 Sea Hawk (LAMPS III)
Armament1 MK 7 MOD 3 AEGIS Weapons System
2 MK26 missile launcher (CG 47 thru CG 51) or
2 MK41 vertical launching system (CG 52 thru CG 73)
0 VLS Cells
127 VLS Cells
Standard Missile (MR)
Anti-Submarine Rocket(ASROC)
Tomahawk ASM/LAM
2 Harpoon Missile Quad-Canister Launchers
2 MK 32 MOD 14 Torpedo Tubes - 6 MK-46 torpedoes
2 MK 45 5"/54-Caliber Lightweight Gun Mounts
1 MK 15 MOD 2 Close-in-Weapons Systems (CIWS) (2 Mounts)
1 MK 36 MOD 2 Super Rapid-Blooming Off-Board Chaff System
2 50-Caliber Machine Guns
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

Ships(同級航艦)
NameNumberBuilder HomeportOrderedCommissionedDecommissioned
Ticonderoga CG 47 Ingalls Pascagoula22 Sep 197822 Jan 1983 2018
YorktownCG 48 Ingalls Pascagoula28 Apr 198004 Jul 1984 2019
VincennesCG 49 Ingalls San Diego28 Aug 198106 Jul 1985 2020
Valley Forge CG 50 Ingalls San Diego28 Aug 198118 Jan 1986 2021
Thomas S. GatesCG 51 BathNorfolk20 May 198222 Aug 1987 2022
Bunker HillCG 52 Ingalls Yokosuka15 Jan 198220 Sep 1986 2021
Mobile BayCG 53 Ingalls Yokosuka15 Jan 198221 Feb 1987 2022
Antietam CG 54 Ingalls San Diego20 Jun 198306 Jun 1987 2022
Leyte Gulf CG 55 Ingalls Mayport20 Jun 198326 Sep 1987 2022
San Jacinto CG 56 Ingalls Norfolk20 Jun 198323 Jan 1988 2023
Lake ChamplainCG 57 Ingalls San Diego16 Dec 198312 Aug 1988 2023
Philippine SeaCG 58 BathMayport27 Dec 198318 Mar 1989 2024
Princeton CG 59 Ingalls San Diego16 Dec 198311 Feb 1989 2024
 

回覆 使用道具 檢舉

你需要登入後才可以回覆 登入 | 註冊

存檔|手機版|聯絡我們|新聞提供|鐵之狂傲

GMT+8, 24-4-29 04:32 , Processed in 0.023479 second(s), 15 queries , Gzip On.

回頂部