鐵之狂傲

 取回密碼
 註冊
搜尋

切換到指定樓層
1#
[size=+1]Buy HK USP Tactical pistols at Impact Guns online store


[size=+1]Buy HK USP Compact pistols at Impact Guns online store [size=+1]


[size=+1]Buy HK USP pistols at Impact Guns online store



Type: Double Action or Double Action Only
Calibers: 9x19mm Luger, .40 S&W, .45 Auto, .357SIG (USP Compact only)
Dimensions (9 x 19 version)
Length: 194 mm
Height: 136 mm
Width: 32 mm
Weight: 720 g
Capacity: USP, USP Match - 15 rds (9mm), 13 rds (.40), 12 rds (.45); USP Compact - 13 rds (9mm), 12 rds (.357 and .40), 8 rds (.45)



Heckler & Koch started the development of a new Universal Selbstlade Pistole (Universal Self-loading Pistol, or USP in short), in mid-1989. The concept of the new design was to provide a universal weapon for police and military forces, available in a variety of versions and sizes. The target market for this new weapon was apparently the USA, as the first version of the pistol, which appeared in 1993, was chambered for a new American cartridge, the .40 S&W. A 9mm version appeared a little later, and in 1995 the slightly modified 9mm USP pistol was adopted by the Bundeswehr (German army) as its new service pistol, under the designation P8. The same year the company also brought out another “America-special” version of the USP, this time in.45 ACP caliber. In 1996 the first of the Compact series of USP pistols entered production, and next year it was officially approved for German police use as the 9mm P10. Several versions of the USP were also made specifically for civilian markets, such as the USP Expert, USP Elite and USP Match. There are also several special-purpose versions of the USP. These include two original variations fitted with extended threaded barrels to be used with silencers, the .45 caliber USP Tactical and 9mm USP 9 SD, recently joined by the .45 caliber USP 45 Compact Tactical, sometimes preferred by the US Military users over the much bulkier and heavier Mark 23 Model 0 pistol of the same caliber.



USP pistols are short-recoil operated, locked-breech pistols with a polymer frame. The barrel is locked to the slide by a single lug, which engages the ejection port. Unlocking is controlled by a cam-shaped extension below the chamber, which interacts with a steel insert set into the frame. Barrels on all USP pistols have polygonal rifling, except the earliest production pistols made in 1993, and all German army P8’s. The captive recoil spring assembly includes an additional recoil spring buffer on full-size pistols and a polymer buffer on Compact pistols. The trigger is double-action, with an external hammer, an automatic firing pin safety and a frame-mounted lever, which may operate differently in different versions of the pistols, as described below. Each pistol can be easily adjusted by a gunsmith to any of the trigger mode configurations, with the replacement of a few parts that include a cam plate and a safety lever. The sights are dovetailed to the slide. Magazines on most USP pistols are of steel construction, but Bundeswehr-owned P8 pistols have semi-translucent polymer magazines. Magazine release levers are ambidextrous and located at the base of the trigger-guard.
There are nine basic variations of the USP trigger/safety arrangements, plus one specific to P8 pistols, as follows:


1. Double action trigger with manual safety on the left side. If lever is pressed below the “fire” position, it acts as a decocker, bringing the hammer down and then returning to the fire position
2. Same as No.1, but the safety lever on the right side
3. Double action trigger with decock-only lever on the left side
4. Same as No.3 but the lever on the right side
5. Double-action-only trigger with manual safety lever on the left side.
6. Same as No.5 but the lever on the right side
7. DAO trigger without any manual safety
8. P8 pistol, with “inverted” safety lever, that is, upper position of the lever is for fire and lower for safe. When the safety is applied, the hammer is decocked automatically
9. Double action trigger with manual safety on the left side. No safe decocking functionality is provided
10. Same as No.9 but the lever on the right side


How to field-strip (disassemble) HK USP pistol: 1) remove the magazine by pressing the magazine release button; 2) check that the chamber is empty; 3) retract the slide partially, so the slide release lever axle is aligned with the disassembly notch on the slide; 4) press on the slide release axis pin from the right side of the frame, then pull the slide release lever completely from the left side; 5) carefully ease the slide forward, then pull it toward the front out of the frame; 6) remove the return spring assembly from below the barrel; 7) pull the barrel out of the slide.
Reassemble in reverse order.

[ 本文最後由 異形 於 06-12-27 12:35 PM 編輯 ]

HK USP in .40SW

HK USP in .40SW

HK USP in .45ACP

HK USP in .45ACP

HK USP .45 Tactical with extended barrel, threaded for sound suppressor (threads are covered by prot

HK USP .45 Tactical with extended barrel, threaded for sound suppressor (threads are covered by prot

HK USP Compact .45ACP

HK USP Compact .45ACP

USP - cutaway

USP - cutaway

the family of the USP handguns

the family of the USP handguns

 
<(ゝω・)綺羅星☆
轉播0 分享0 收藏0

回覆 使用道具 檢舉

Mk.23 mod.0 US SOCOM pistol

Mk.23 mod.0 US SOCOM pistol


Caliber: .45 ACP
Action: Double Action
Length: 245 mm
Height: 150 mm
Width: 38,8 mm
Weight: 1100 g
Magazine capacity: 12 rounds

This handgun was developed under request from US SOCOM (Special Operations Command) and entered the competition with Colt for OHWS - Offensive Handgun Weapon System - first offensive handgun for US Military since the adoption of the Colt M1911 Govt. The request was issued in mid-1991, and the only other major competitor to H&K was the Colt company with its SOCOM pistol. By the 1993 H&K delivered first prototypes of its contestant, and eventually HK SOCOM pistol became the Mk.23 model 0 pistol, issued by US Special Operations command to its operators. The Mk.23 mod.0 is chambered for venerable .45ACP cartridge, which provides greater stopping power than a NATO-standard 9mm Luger cartridges. Mk.23 mod.0 is designed to safely and reliable fire most powerful .45ACP +P ammunition, either with ball (FMJ) or expansive (JHP) bullets. Mk.23 mod.0 is usually issued with quick-detachable silencers, made in USA by Knight's Armaments Co, and with laser pointing module, which installs on the underbarrel rails. First production Mk.23 model 0 pistols were delivered to users in 1996.

In general, the Mk.23 mod.0 is an extremely reliable and quite powerful combat pistol, the only drawback being a somewhat excessive size and weight, so, in some cases, operators prefer to carry smaller and lighter HK USP Tactical pistols, which share most features of Mk.23 mod.0.

Heckler-Koch also produced a civilian version of the Mk.23 mod.0 pistol, designated as Mark 23, which is sold with 10-rounds magazines, to comply with US laws.

The Mk.23 mod.0 is a short recoil operated, locked breech semiautomatic pistol. The barrel locks to the slide using one single lug, which fits to the ejection port in the slide. The patented dual recoil springs arrangement allows for decreased felt recoil and increased service life of pistol. Frame of the gun is made from high-strength polymer. The double action trigger system features a separate decocker lever, an ambidextrous safety, which allows for "cocked and locked" carry, and a slide stop. Enlarged triggerguard allows for comfortable shooting when wearing gloves. Ambidextrous magazine release lever is located in the base of the triggerguard, and should be depressed down to release magazine. Both front and rear sights are equipped with luminous dots, and mounted in dovetail grooves.



BLACK TOMB RAIDER USP SPRING PISTOL  
This beautiful, highly realistic handgun is modeled after the one used by the beautiful, highly realistic Laura Croft in the movie Tomb Raider . It's full-size and heavy-weight, closely simulating the feel of real steel to give you the most authentic experience possible. The finely detailed body is constructed of ABS plastic with some metal internal parts.



[ 本文最後由 異形 於 06-12-27 12:42 PM 編輯 ]

Mk.23 mod.0 pistol, left side. Above the grip are clearly seen are separate safety (rear) and decock

Mk.23 mod.0 pistol, left side. Above the grip are clearly seen are separate safety (rear) and decock

Mk.23 mod.0 pistol, right side. Note the extended barrel with screw-on thread protector on the muzzl

Mk.23 mod.0 pistol, right side. Note the extended barrel with screw-on thread protector on the muzzl

Mk.23 with silencer and laser aiming device

Mk.23 with silencer and laser aiming device

 

回覆 使用道具 檢舉

你需要登入後才可以回覆 登入 | 註冊

存檔|手機版|聯絡我們|新聞提供|鐵之狂傲

GMT+8, 24-5-7 15:50 , Processed in 0.022409 second(s), 17 queries , Gzip On.

回頂部