鐵之狂傲

 取回密碼
 註冊
搜尋

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

切換到指定樓層
1#
M113A1 Armored Personnel Carrier



M113

The M113A1, informally known as the Gavin, is a lightly armoured full tracked air transportable personnel carrier designed to carry personnel and certain types of cargo. The M113-family was developed from M59 and M75 by Ford and Kaiser Aluminium and Chemical Co. in the late 1950愀. The vehicle is capable of: amphibious operations in streams and lakes; extended cross country travel over rough terrain; and high speed operation on improved roads and highways.
The M113 Family includes approximately 12 variants of light armored tracked vehicles used in a variety of combat and combat support roles. Total density exceeds 28,000. Today's M113 Family of Vehicles is composed of a mix of derivative systems consisting of the A1, A2, and A3 configurations. The current fleet includes: M113A2; M113A3; M106A2; M1064; M1064A3; M548A1; M548A3; M577A2; M577A3; M730A2; M901A1; M981; M1068; M1068A3; M1059; and M1059A3. Over the next 10-15 years, the majority of these systems will be converted to the A3 configuration.


衍生系列

M58 Wolf Smoke Generator Carrier
M106 Self-propelled 107mm Mortar
M113 Armored Medical Evacuation Vehicle AMEV
M125 Self-propelled 81mm Mortar
M548 Cargo Carrier
M577 Command Post Carrier
M730 Guided Missile Equipment Carrier (Chaparral)
M901 Improved TOW Vehicle
M981 Fire Support Team Vehicle (FISTV)
M1059 Lynx Smoke Generator Carrier
M1064 Self-propelled 120mm Mortar
M1068 Standard Integrated Command Post System (SICPS) Carrier
M1108 Universal Carrier
 
轉播0 分享0 收藏0

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

Since their initial introduction in 1960, M113-based systems have entered service in more than 50 countries. The systems have been modified into more than 40 identified specific variants, with many times that number of minor field modifications. Many of these modifications have been developed by foreign governments to meet their specific national requirements. While some older M113 derivatives are being retired and removed from selected inventories, other FOV members are being upgraded, reconfigured, and introduced as entirely new systems.

More than 80,000 M113 Family of Vehicle (FOV) systems have been produced. New M113 FOV systems are being built while existing chassis are being upgraded to modern configurations.

The M113 APC was the first modern "battle taxi"; developed to transport infantry forces on the mechanized battlefield. It is fitted with a 2 stroke six cylinder Detroit diesel providing power through a 3 speed automatic gearbox and steering differential. The main armament is a single .50 Cal heavy barrel machine gun, and the secondary armament is a single .30 Cal machine gun. The M113 is built of aircraft quality aluminum which allows it to possess some of the same strengths as steel at a much lighter weight. This distinct weight advantage allows the M113 to utilize a relatively small engine to power the vehicle, as well as carry a large payload cross-country. The vehicle is capable of "swimming" bodies of water.


The vehicle is not mission capable if any one track shoe is damaged. If the M113 loses a track, breaks a track shoe or the vehicle throws a track, extreme caution must be exercised in maintaining control. The driver must immediately release the accelerator and let the vehicle coast to a stop. Applying braking action, i.e. brake pedal, laterals, pivot or any type of steering controls causes the vehicle to pull to the active or good track and could result in a roll-over. If it is absolutely necessary, the driver may apply braking action only, and only if the vehicle is approaching a ravine, a cliff, or if other catastrophic outcome, probably resulting in fatalities. When roll-over is imminent; it is safer to stay in the vehicle than to try to get out while the vehicle is still moving. Crew members may receive slight injuries from being thrown against metal parts, but if they try to leave the vehicle, it may roll over and crush them. Once the vehicle stops moving, the crew should get out as fast as possible because spilled fuel and oil may catch on fire. The first thing the driver should do in such an emergency is shut off the engine and turn off the master switch to minimize the fire hazard.
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

型號年代表

 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

M113 型號數據

   [size=+2]Historical Evolution
M113 M113A1 M113A2 M113A3
Date Introduced 1960 1964 1979 1987
Curb Weight (lbs) 20,310 21,474 21,608 23,575
Combat Weight (lbs) 23,520 24,594 24,728 27,000
Top Speed (mph) 37 37 37 41
Cruising Range (miles) 200  300
Engine Type Gasoline Diesel
Engine HP  209 212 275
HP/Ton 17.8 17.2 17.1 20.4
Acceleration (0-20 mph) sec 12.0 10.5 11.0 7.8
Turning Radius (in) 276 168  Pivot
Trench Crossing (in) 66
Slope (%) 60
Side Slope (%) 30
Braking (ft)  40 27
Ground Pressure (psi) 7.5 7.8 7.9 8.6
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

M113 Armored Personnel Carrier
The original M113 Armored Personnel Carrier (APC) helped to revolutionize mobile military operations. The vehicles were able to carry 11 soldiers plus a driver and track commander under armor protection across hostile battlefield environments. More importantly, the new vehicles were air transportable, air-droppable, and swimmable, allowing planners to incorporate APCs in a much wider range of combat situations, including many "rapid deployment" scenarios. The M113s were so successful that they were quickly identified as the foundation for a family of vehicles. Early derivatives included both command post (M577) and mortar carrier (M106) configurations.

M113A1 Armored Personnel Carrier
The first major upgrade came in 1964 with the introduction of the M113A1 package which replaced the original gasoline engine with a 212 horsepower diesel package. The new power train was soon incorporated into the existing vehicle family as the M113A1, M577A1, and M106A1, as well as several new derivative systems. Some of these new derivatives were based on the armored M113 chassis (the M125A1 mortar carrier and M741 "Vulcan" air defense vehicle) while others were based on an unarmored version of the chassis (including the M548 cargo carrier, M667 "Lance" missile carrier, and M730 "Chaparral" missile carrier).

M113A2 Armored Personnel Carrier
Continuing modernization efforts led to the introduction of the A2 package of suspension and cooling enhancements in 1979. As with previous enhancements, these upgrades resulted in further proliferation of the FOV.

M113A3 Armored Personnel Carrier

Most of the M113 family that saw service during Desert Storm were underpowered A2 level vehicles. M113A3 that were in the conflict kept pace with the Abrams equipped maneuver forces. Since 1987 the PM office has been modernizing the M113 fleet to the A3. This block modification should be completed for FP1 by 2001 with current funding.
Today's M113 fleet includes about four thousand M113A3 vehicles equipped with the most recent recent A3 RISE (Reliability Improvements for Selected Equipment) package. The standard RISE package includes an upgraded propulsion system (turbocharged engine and new transmission), greatly improved driver controls (new power brakes and conventional steering controls), external fuel tanks, and 200 AMP alternator with 4 batteries. Additional A3 improvements, include incorporation of spall liners and provisions for mounting external armor.
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

M113裝甲分析圖(反白)

 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

The M113A3, a full-tracked armored personnel carrier provides protected transportation and cross country mobility for personnel and cargo. A light armored vehicle weighing 27,200 pounds, it carries 11 infantry personnel in addition to the vehicle driver and track commander. It is capable of sustained speeds of 41 mph on level roads and accelerates from 0 to 35 mph in 27 seconds (this compares to 69 seconds for the M113A2).
The M113A3 is a product improved version of the M113A2 with improved transmission and engine. The U.S. Army first identified the need to up-power the M113A2 carrier in the mid-1970s. This need was driven by increases in vehicle weight and a requirement to increase the mobility and survivability of the system. As a result, the "RISE" powertrain was developed and tested at Yuma and Aberdeen Proving Grounds. However, application of the new powertrain was deferred due to a lack of funds.

In 1984 a decision was made to incorporate the RISE package, improved driver controls, spall liners, external fuel tanks and provisions for installation of an external armor kit on an M113 chassis. Additionally, a bolt-on armor kit providing 14.5 mm ballistic protection was developed and tested. Except for the mounting provisions the external armor appliquÈ was not incorporated for production.

The new X200-4/4A hydrostatic steer transmission permits use of a more powerful engine, the 275 HP turbocharged Detroit Diesel 6V53T, and eliminates the transfer case and controlled differential. The RISE powerpack increases fuel economy, acceleration, hill climbing speed and braking capabilities and allows the vehicle to maintain speed through corners by accelerating the outer track rather than braking the inner track as on the A2. The increase in horsepower also allows installation of an external armor kit (which increases the gross vehicle weight to 31,000 pounds) and provides mobility comparable to currently fielded vehicles such as the M1 tank and M2/M3 Bradley Fighting Vehicles.

Steering is improved with an automotive-type steering yoke and foot brake arrangement which improves driver control, lessens fatigue and simplifies driver training from that of the A1/A2 steering/braking laterals. Due to load matching ability and increased steering capability, cross country performance is also improved.

Crew survivability is increased by the addition of spall suppression liners and locating the fuel tanks externally, on the rear of the vehicle. The inside of the vehicle (sides, roof and rear) are covered with spall suppression liners which limit troop injuries from the effect of overmatching weapons by restricting the spread of spall when a round penetrates the hull. External fuel tanks free up 16 cubic feet of usable space inside the vehicle and reduce the fire hazard inside the crew compartment. Two tanks and independent valving provide redundancy in the fuel system allowing continued operation when one tank is damaged.

External differences between M113A2 and M113A3 include external fuel tanks and provisions for the installation of an add-on-armor kit.

The M113A3 was type classified Standard. All new APC vehicles produced since 1987 and all converted vehicles since 1989 are the A3 variant. Vehicles have been fielded both in the U.S. and in foreign countries. The M113A3 was initially fielded in 1987 and U.S. production of new M113A3s was completed in 1992. M113A3s are currently being produced for Thailand as a direct sale. Conversion of M113A2 vehicles to M113A3 vehicles has been underway at United Defense, L.P. since 1994. Previously, conversions of M113A2 vehicles to M113A3 vehicles were completed at Red River and Mainz Army Depots, as well as in Korea.

The future M113A3 fleet will include a number of vehicles that will have high speed digitial networks and data transfer systems. The M113A3 digitization program supports the Army's Modernization Plan by applying applique hardware, software, and installation kits and hosting them in the M113A3 FOV. Current plans call for these systems to be integrated into the M113A3 FOV by the year 2006.
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

實體比例 & 四視角圖

[size=+2]Vehicle Characteristics
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

General
Length191.5"
Width105.75"
Height86.5"
Clearance16"
Weight, combat loaded 27,180 lb. (12,329 kg)
Maximum weight 31,000 lb. (14,061 kg)
Net weight 23,880 lb. (10,832 kg)
Air drop weight22,128 lb. (10,037 kg)
Personnel capacity2 + 11
Fuel tank capacity 95 gallons (360 liters)
Ground pressure8.63 psi (0.60 kg/cm2)
Performance
Speed on land 41 mi/h (66 km/h)
Speed in water, with track 3.6 mi/h (5.8 km/h)
Cruising range 300 mi (483 km)
Turning radius Pivot to infinite
Slope 60%
Side slope 40%
Trench crossing 66 in. (168 cm)
Vertical wall climbing24 in. (61 cm)
Braking (20-0 mi/h) 40 ft.
Engine
Make and model Detroit Diesel 6V53T
Displacement 318 in.3 (5.2 liter)
Fuel Diesel (DF2)
Rated horsepower 275 hp
Gross horsepower-to-weight ratio 20.2 hp/ton
Transmission, Automatic
Make and model Allison X200-4B
Type Hydrokinetic
Steering Hydrostatic
Brake type Multiple wet plate
Running Gear
Suspension Torsion bar
Road wheels 5 per side, 24 inch diameter (61 cm)
Track type Steel single pin, detachable rubber pad
Number of shoes 63 left, 64 right
Track pitch 6 in. (15.2 cm)
Track width 15 in. (38 cm)
Shock absorbers 3 per side
Wheel travel 9.0 in. (22.9 cm)
Electrical System
Generator
Amperes 200, 300 optional
Volts, dc 28
Batteries 4, type 6TL, 120 amp-hr, 12-volt each
Armament
50 cal MG 2,000 ready rds.
Armor
Basic hull 5083 Aluminum
Bolt-on armor kitSteel armor
Mine armor Steel armor
Gun shield kit Steel armor
Spall suppressant Composite panel
Fire Extinguishers
Fixed 5 lb. (2.3 kg) CO2 for engine compartment
Portable 5 lb. (2.3 kg) CO2
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3




             M113A1型                                     M113A2型



                 M113內部透視圖

                   M113上視圖
 

回覆 使用道具 檢舉

你需要登入後才可以回覆 登入 | 註冊

存檔|手機版|聯絡我們|新聞提供|鐵之狂傲

GMT+8, 24-6-13 21:34 , Processed in 0.025303 second(s), 16 queries , Gzip On.

回頂部