To resolve this issue:
- Insert the CD into the CD drive or DVD drive.
- Click Start, and then click Run.
- In the Open box, type cmd, and then click OK.
- At the command prompt, type the following commands, pressing ENTER after each command:
expand CD-ROM Drive Letter:\i386\config.nt_ c:\windows\system32\config.nt
expand CD-ROM Drive Letter:\i386\autoexec.nt_ c:\windows\system32\autoexec.nt
expand CD-ROM Drive Letter:\i386\command.co_ c:\windows\system32\command.com
exit
- Start or install the program. If the issue is resolved, do not complete the remaining steps. If the issue is not resolved, go to the next step.
- Note: The Command.com file is not edited or created in this in the following process. Because of this, you may have to expand it from your Windows XP CD-ROM.
Start Notepad.
- In Notepad, type the following entries: dos=high, umbdevice=%SYSTEMROOT%\system32\himem.sysfiles=40
- On the File menu, click Save As.
- In the File Name box, type Config.nt, and then click Save. Close the Config.nt file.
- On the File menu, click New.
- In the new blank document, type the following entries: @echo off lh %SYSTEMROOT%\system32\mscdexnt.exe lh %SYSTEMROOT%\system32\redir lh %SYSTEMROOT%\system32\dosx SET BLASTER=A220 I5 D1 P330 T3
- On the File menu, click Save As.
- In the File Name box, type Autoexec.nt, and then click Save. Close the Autoexec.nt file.
- Start Windows Explorer. Locate the Config.nt file, right-click the Config.nt file, and then click Copy.
- Right-click the %SYSTEMROOT%\System32 folder, and then click Paste.
- Locate the Autoexec.nt file, right-click the Autoexec.nt file, and then click Copy.
- Right-click the %SYSTEMROOT%\System32 folder, and then click Paste.
- Locate the Command.com file, right-click the expanded Command.com file, and then click Copy.
- Right-click the %SYSTEMROOT%\System32 folder, and then click Paste. Restart your computer.
| 歡迎光臨 鐵之狂傲 (https://www.gamez.com.tw/) |